September 3, 2024

Monthly wholesale electricity prices and demand in New England, July 2024

Wholesale power prices averaged $42.65 per megawatt-hour (MWh) in the Real-Time Energy Market in July 2024, up 9% compared to the previous year.¹ Day-Ahead Energy Market averages were $46.16/MWh, up 9% from July 2023.

By the numbers

July 2024 and Percent Change from July 2023 and June 2024	July 2024	July 2023	June 2024
Average Real-Time Electricity Price ($/megawatt-hour)	$42.65	9.2%	38.0%
Average Natural Gas Price ($/MMBtu)	$1.83	-33.0%	-4.7%
Peak Demand	24,816 MW	7.9%	3.0%
Total Electricity Use	12,301 GWh	2.2%	21.7%
Weather-Normalized Use²	11,128 GWh	1.6%	15.2%

Drivers of wholesale electricity prices

In general, the two main drivers of wholesale electricity prices in New England are the cost of fuel used to produce electricity and consumer demand.

Power plant fuel

Fuel is typically one of the major input costs in producing electricity. Natural gas is the predominant fuel in New England, used to generate 55% of the power produced in 2023 by New England’s power plants, and natural gas-fired power plants usually set the price of wholesale electricity in the region. As a result, average wholesale electricity prices are closely linked to natural gas prices.

The average natural gas price during July was $1.83 per million British thermal units (MMBtu).³ The price was down 33% from the July 2023 average Massachusetts natural gas index price of $2.73/MMBtu. The Mass. index price is a volume-weighted average of trades at four natural gas delivery points in Massachusetts, including two Algonquin points, the Tennessee Gas Pipeline, and the Dracut Interconnect.

Wholesale electricity and natural gas prices

Electricity demand

Demand is driven primarily by weather, as well as economic factors. Energy usage during July increased 2.2% to 12,301 GWh from the 12,032 GWh used in July 2023. The average temperature during July was 76˚ Fahrenheit (F) in New England, up 2˚ from the previous July. The average dewpoint, a measure of humidity, was 65˚F in July, up 1˚ from the previous July. There were 196 cooling degree days (CDD) during July, while the normal number of CDD in July is 124 in New England.⁴ In July 2023, there were 192 CDD. There were no heating degree days (HDD) during July, while the normal number of HDD in July is 4 in New England. In July 2023, there were no HDD.

Consumer demand for electricity for the month peaked on July 16 during the hour from 5 to 6 p.m., when the temperature in New England was 91°F and the dewpoint was 70°. Demand reached 24,816 MW. The July 2024 peak was 7.9% higher than the July 2023 peak of 22,999 MW, set during the hour from 5 to 6 p.m. on July 6, when the temperature was 86°F and the dewpoint was 69°.

Peak demand is driven by weather, which drives the use of heating and air conditioning equipment. The all-time high winter peak was 22,818 MW, recorded during a cold snap in January 2004 when the temperature was -1°F and the dewpoint was -20°. The all-time peak demand in New England was 28,130 MW, recorded during an August 2006 heat wave, when the temperature was 94°F and the dewpoint was 74°. Air conditioning use is far more widespread than electric heating in New England, so weather tends to have a relatively greater impact on the summer peak than the winter peak.

Monthly peak demand and total and weather-normalized energy use

Resource mix and emissions

The mix of resources used in any given time period depends on price and availability, as well as supplemental resource commitments needed to ensure system stability. Natural gas-fired and nuclear generation produced about 83% of the 11,347 GWh of electric energy generated within New England during July, at about 61% and 22%, respectively. Renewable resources generated about 10% of the energy produced within New England, including 3.8% from wood, refuse, and landfill gas; 1.5% from wind; and 4.5% from solar resources. Coal and oil-fired resources each generated 0.4%. Hydroelectric resources generated 6.2%. The region also received net imports of about 1,177 GWh of electricity from neighboring regions.

The mix of resources used to produce the region’s electricity is a key driver of carbon dioxide (CO₂) emissions. The ISO estimates these emissions through an analysis that blends data on electricity generation by fuel type with an emissions factor for each fuel that is based on data from the Environmental Protection Agency.⁵

July estimated CO₂ emissions in New England, by fuel source (metric tons)

New England power plants produced an estimated 3.43 million metric tons of CO₂ in July 2024, a 3.4% increase from the previous July.

Estimated CO₂ emissions from natural gas-fired plants—typically the region’s largest source of power system emissions, due to the significant amount of electricity these resources produce—increased year over year, rising from 2.62 million metric tons to 2.73 million metric tons. These resources accounted for 80% of the power system’s estimated emissions.

Together, oil- and coal-fired resources produced an estimated 83,679 metric tons of CO₂ in July 2024 (2.4% of the total), up from an estimated 32,137 metric tons in July 2023. Oil-fired resources ran more frequently in July 2024 due in part to higher peak demand levels than the region saw the previous year.

CO₂ emissions from other resources—mostly refuse and wood—were estimated at 614,293 metric tons, down 8% from July 2023. These resources accounted for about 18% of the power system’s estimated CO₂ emissions for the month.

¹One megawatt (MW) of electricity can serve about 750 to 1,000 average homes in New England. A megawatt-hour (MWh) of electricity can serve about 1,000 homes for one hour. One gigawatt-hour (GWh) can serve about 1 million homes for one hour.

²Weather-normalized demand indicates how much electricity would have been consumed if the weather had been the same as the average weather over the last 20 years.

³A British thermal unit (Btu) is used to describe the heat value of fuels, providing a uniform standard for comparing different fuels. One million British thermal units are shown as MMBtu.

⁴A degree day is a measure of heating or cooling. A zero degree day occurs when no heating or cooling is required; as temperatures drop, more heating days are recorded; when temperatures rise, more cooling days are recorded. The base point for measuring degree days is 65 degrees. Each degree of a day’s mean temperature that is above 65 degrees is counted as one cooling degree day, while each degree of a day’s mean temperature that is below 65 degrees is counted as one heating degree day. A day’s mean temperature of 90 degrees equals 25 cooling degree days, while a day’s mean temperature of 45 degrees equals 20 heating degree days.

⁵The factors used to calculate estimated CO₂ emissions were updated in January 2024. ISO New England analysts regularly review and refine the methodology used to develop these emissions factors, in order to reflect the characteristics of New England’s generating fleet and improve the accuracy of the estimates.